Facebook
Like our Facebook page and
follow us on Instagram for access
to specials and discount codes!
Instagram






  Store > Dana 60 >

Crown Race Gears for Dana 60 Axles (Race Spec)
Crown Race Gears Ring and Pinion Sets
Photo is for illustration purposes only and may
not be an accurate depiction of this product.
  
Additional Images
List Price: $800.00


Status: Usually Ships in 4 to 6 Weeks
Product Code: CRG-D60

Select Gear Set


- Thick gears for use in 4.10 and lower carriers.
- Other ratios may be available by special order.

Gear Options

(S) Shaved Ring Gear [+$125.00]
- Gears shaved to customer spec OD.

(MPI) Magnaflux Inspection [+$90.00]
- Inspection report will be provided with gears.

Qty:  
Description Compatibility Part Numbers
 

Crown Race Gears are engineered, processed, and treated to be the strongest, toughest, most efficient, and longest-lasting racing ring and pinion gears in the industry. They are forged from a proprietary steel alloy, precision machined, heat treated, lapped, two-stage shot peened, cryogenically tempered, manually deburred, and REM ISF finished, before going through a thorough quality control inspection. An optional Magnaflux inspection is also available for critical applications. All gears are backed by a lifetime warranty with an available 5 year renewable racing warranty that covers race use.

Dana 60 Crown Race Gears are 9.75" OD and will fit Super 60 axles.

Dana Super 60 10" gears are available by special order.

Note: Thick Gears are machined to fit 4.10 and lower differential carriers only.


For an in-depth look into how Crown Race Gears are engineered, processed, and treated, see here:
Crown Race Gears Production Process


Metallurgy
Crown Race Gears uses a very specific steel alloy that contains elements used to improve core toughness for increased shock load absorption while supporting increased case hardeness after heat treating for a longer working life and maximum efficiency. Additional elements are added to improve corrosion resistance, deoxidation, machining, grain structure, and wear resistance.
♦ More about Crown Race Gears Metallurgy 		Gear Geometry
Crown Race Gears are CNC cut using a 5-cut process that is designed to let the gear teeth slide along their faces for improved lubrication under high loads and temperatures. This gear geometry prevents the gear teeth from contacting each other in consistent spots, making them far less susceptible to pitting, excessive wear, and micro fractures.
♦ More about Crown Race Gears Geometry
Two-Stage Shot Peening
Crown Race Gears are shot peened in two separate stages. The first stage is done before lapping and focuses on balancing internal stresses and surface tensions, trapping microscopic surface imperfections, and improving the case hardness of the gear. The second stage is performed after cryogenic tempering and directed at the gear tooth roots where micro fractures are most likely to form and where the highest forces and stresses are seen.
♦ More about Crown Race Gears Shot Peening 		Cryogenic Treatment
Crown Race Gears are cryogenically tempered by cooling the gears to -315˚F in a computer controlled process for an extended period of time before slowly returning them to room temperature. This process improves the gears toughness and hardness by converting any remaining austenite to martensite (the basis of heat treating), improving the surface to core harness transition, and significantly balancing the gear core microstructure.
♦ More about Crown Race Gears Cryogenics
REM ISF Finishing
Crown Race Gears are Isotropic Superfinished by REM Surface Engineering to produce an exceptionally smooth surface on the gear teeth for significantly improved efficiency and lubrication that dramatically reduce operating temperatures and increase gear life. After treatment, the gears are left with a polished, chrome-like finish that is both corrosion resistant and requires no break in process after the initial installation.
♦ More about Crown Race Gears REM ISF Finishing 		Magnaflux
Crown Race Gears offers an optional magnetic particle inspection (MPI), also known as Magnaflux, for critical applications. This process uses a magnetic flux (similar to dye) that is applied to the gears in a magnetic field where they concentrate around imperfections and micro fractures that can then be easily identified under UV lighting. This process is also available independently for continuing maintenance on all Crown Race Gears.
♦ More about Crown Race Gears Magnaflux


Crown Race Gears ring and pinion images are © Copyright Crown Race Gears, LLC used with permission.
Additional images and product descriptions are © Copyright Filthy Motorsports, LLC.
Features
  • Forged Steel Core
  • CNC 5-Cut Gear Geometry
  • Cryogenically Treated
  • REM ISF Superfinished
  • Large Radius Deburred
  • No Break In Needed
  • Reverse Rotation Compatible
  • Lifetime Non-Race Warranty
  • 5-Year Renewable Race Warranty


Share your knowledge of this product with other customers... Be the first to write a review