Facebook
Like our Facebook page and
follow us on Twitter for access
to specials and discount codes!

Twitter







  Store > RCV Axle Shafts >

Ford 8.8" RCV 4340 Chromoly CV Shafts | Ford F-150 / Raptor (2009 - 2014)
RCV Axle Shafts
Photo is for illustration purposes only and may
not be an accurate depiction of this product.

 
Price: $2,749.95



Status: In Stock
Product Code: RCV-CVJIFS-FORD1

RCV Axle Shaft Options:

Custom Length Axle Shafts [+$200.00]
- We will contact you after the order to confirm measurements.
- Custom axle shafts have a 4 to 5 week lead time.


Optional Services

Add Cryogenic Treatment Service [+$300.00]
- Increases strength and durability of axles by 20-50%.
- Improves case and core hardness transition and microstructure.
- Relieves internal stresses and reduces microfractures.


Services are performed by Crown Race Gears.
Service times vary by season (2 to 6 weeks).


Qty:  
Description Compatibility Part Numbers
 

Model: Vehicle / Application:
CVJIFS-FORD1 2009-2014 Ford F-150 / Raptor Front Ford 8.8" IFS

These RCV CV Shafts fit '09 to '14 Ford F-150 and F-150 Raptor front Ford 8.8" IFS axles.
**Requires 30 spline hub upgrade and other minor modifications, call for details.**


Inner Splines: 30
Outer Splines: 30
Left Inner Length: 18.90"
Right Inner Length: 33.90"
Outer Stub Length: 9.72"
Warranty: Up to 47" Tires
Inner Seal:Standard Boot
Outer Seal: RCV SST Boot

*Shaft lengths are OEM shafts measured from center of U-joint to end of splined shaft.*



RCV Ultimate CV Axle Shafts feature ultra high-strength constant velocity joints and 4340 chromoly shafts that are twice as strong as your OEM CV axle shafts. They are rated for oversize tires, high horsepower engines, and aggressive driving, all of which are covered under RCV's unprecedented limited lifetime warranty. CV axle sets includes right and left side CV shafts, SST seals and installation tool, installation instructions, synthetic moly grease, and installation hardware. Black oxide coating is standard with nickel plating available for extra corrosion at an additional cost. RCV axles are highly recommended by Filthy Motorsports and almost all of our Ultra4 racers, desert racers, and rock bouncers run them.



Maximum Strength At All Angles
RCV axle shafts feature race-grade 4340 chromoly housings, bearings cages, inner races and axles shafts that have proven in tests to be twice as strong as OEM axle shafts. Even more impressive is that they maintain their strength all the way up to 45 degrees, well beyond the 15 to 20 degree limit of traditional tripod style CV shafts and where they would be at their weakest point.

RCV Axle Shafts



Constant Output Shaft Speed
The weak link of tripod style CV axle shafts is that they bind when the angle between the input and output shafts increases which causes the speed of the output shaft to change multiple times during every rotation. This weakness is further exaggerated when you add large tires and more power. RCV has solved these problems with a Rzeppa style CV joint that spreads the torque load over six bearings in a housing that keeps both input and output shafts at equal angles for constant shaft speeds up to an astonishing 45 degrees.

RCV Axle Shafts



Built To Perform, Built to Last
RCV Ultimate CV Axles are engineered to be that last axle shafts you will ever need. In addition to their constant velocity design that spreads torque over 6 internal bearings, RCV axles feature chromoly shafts, housings, bearing cages and inner races. They are fully black zinc coated to prevent corrosion and the internals are REM polished for decreased wear and smoother movement. An external Zerk fitting makes for easy lubrication and the design itself requires less frequent maintenance.

RCV Axle Shafts



Limited Lifetime Warranty - No Questions Asked
RCV is so confident in the quality and reliability of their Ultimate CV Axles that they back them all with a “No Questions Asked” lifetime warranty. If you break it, they will replace it!


RCV Axle Shaft images are ©Copyright RCV Performance, used with permission.
Additional images and product descriptions are © Copyright Filthy Motorsports, LLC.
Features
  • No Questions Asked Limited Lifetime Warranty
  • 4340 Chromoly Shafts and Components
  • External Zerk Fitting for Easy Lubrication
  • Up to 45 Degree Steering Angle
  • REM Polished Internals for Reduced Wear
  • Black Oxide Coating for Corrosion Resistance
  • Rebuild Kits Available
  • Made in USA


Share your knowledge of this product with other customers... Be the first to write a review